Ordinul Nr.51 din 23.03.2015

pentru aprobarea Ghidului de securitate nucleară privind codurile şi standardele industriale pentru centralele nuclearoelectrice
ACT EMIS DE: Comisia Nationala pentru Controlul Activitatilor Nucleare
ACT PUBLICAT ÎN MONITORUL OFICIAL NR. 228 din 03 aprilie 2015

În conformitate cu prevederile art. 7 alin. (7) din Regulamentul de organizare şi funcţionare a Comisiei Naţionale pentru Controlul Activităţilor Nucleare, aprobat prin Hotărârea Guvernului nr. 1.627/2003, cu modificările şi completările ulterioare,având în vedere art. 5 din Legea nr. 111/1996 privind desfăşurarea în siguranţă, reglementarea, autorizarea şi controlul activităţilor nucleare, republicată, cu modificările şi completările ulterioare;luând în considerare Referatul nr. 14.670 din 10 martie 2015,preşedintele Comisiei Naţionale pentru Controlul Activităţilor Nucleare emite următorul ordin: Articolul 1Se aprobă Ghidul de securitate nucleară privind codurile şi standardele industriale pentru centralele nuclearoelectrice, prevăzut în anexa care face parte integrantă din prezentul ordin. Articolul 2Prezentul ordin se publică în Monitorul Oficial al României, Partea I. Preşedintele Comisiei Naţionale pentru Controlul Activităţilor Nucleare, Constantin Popescu
ANEXĂGHID DE SECURITATE NUCLEARĂ privind codurile şi standardele industriale pentru centralele nuclearoelectrice Capitolul I Domeniu, scop, definiţii Secţiunea 1Domeniu şi scop Articolul 1 (1) Prezentul ghid este emis în conformitate cu prevederile Legii nr. 111/1996 privind desfăşurarea în siguranţă, reglementarea, autorizarea şi controlul activităţilor nucleare, republicată, cu modificările şi completările ulterioare.
(2) Prin prezentul ghid se stabilesc recomandările Comisiei Naţionale pentru Controlul Activităţilor Nucleare, denumită în continuare CNCAN, pentru utilizarea codurilor şi standardelor industriale în cadrul activităţilor de amplasare, construcţie, punere în funcţiune şi exploatare a unei centrale nuclearoelectrice. Articolul 2Prevederile din prezentul ghid se aplică atât solicitanţilor, cât şi titularilor de autorizaţie, pentru fazele de amplasare, construcţie, punere în funcţiune şi exploatare a unei centrale nuclearoelectrice, după caz. Secţiunea a 2-aDefiniţii Articolul 3 (1) Termenii utilizaţi în prezentul ghid sunt definiţi în anexa nr. 1, cu excepţia acelora ale căror definiţii se regăsesc în textul prezentului ghid.(2) Centrala nuclearoelectrică este denumită în continuare prin abrevierea CNE.(3) Abrevierea SSCE se utilizează pentru a face referire în mod generic la sistemele, structurile, componentele şi echipamentele CNE, inclusiv la software-ul pentru instrumentaţie şi control. Capitolul IIUtilizarea codurilor şi standardelor Secţiunea 1Recomandări pentru solicitanţii şi titularii de autorizaţii Articolul 4 (1) Solicitanţii de autorizaţie pentru fazele de amplasare, construcţie, punere în funcţiune şi exploatare a unei CNE întocmesc şi prezintă spre aprobare la CNCAN o listă completă de coduri şi standarde aplicabile SSCE cu funcţii de securitate nucleară şi protecţie fizică şi activităţilor aferente, precum şi domeniile de aplicare a acestora în activităţile de proiectare, procurare, analiză şi verificare, execuţie, fabricare, montare, instalare, testare, inspecţie, întreţinere şi operare. (2) La întocmirea listei prevăzute la alin. (1) pentru o CNE se recomandă includerea codurilor şi standardelor din anexa nr. 2, cu precizarea ediţiei propuse pentru aplicare. Este permisă utilizarea unor coduri şi standarde diferite sau aflate la ediţii diferite de cele din anexa nr. 2, însoţită de o justificare tehnică prin care se demonstrează că se asigură măsuri de securitate nucleară cel puţin echivalente cu cele cerute prin codurile şi standarde recomandate de CNCAN.(3) Acolo unde interpretarea prevederilor din codurile şi standardele din anexa nr. 2 depinde de cerinţele de reglementare din ţările de origine ale codurilor şi standardelor respective, solicitanţii de autorizaţie pot solicita la CNCAN clarificări cu privire la modul de aplicare. Articolul 5(1) Titularii de autorizaţie pentru fazele de amplasare, construcţie, punere în funcţiune şi exploatare a unei CNE menţin la zi lista completă de coduri şi standarde aplicabile SSCE cu funcţii de securitate nucleară şi protecţie fizică şi activităţilor aferente, împreună cu domeniile de aplicare a acestora în activităţile de proiectare, procurare, analiză şi verificare, execuţie, fabricare, montare, instalare, testare, inspecţie, întreţinere şi operare.(2) La actualizarea listei prevăzute la alin. (1) pentru o CNE se recomandă includerea codurilor şi standardelor din anexa nr. 2, cu precizarea ediţiei propuse pentru utilizare. Este permisă utilizarea unor coduri şi standarde diferite sau aflate la ediţii diferite de cele din anexa nr. 2, în baza unei justificări tehnice care prezintă modul în care titularul de autorizaţie asigură măsuri de securitate nucleară echivalente cu cele cerute prin codurile şi standardele recomandate de CNCAN. (3) Acolo unde interpretarea prevederilor din codurile şi standardele din anexa nr. 2 depinde de cerinţele de reglementare din ţările de origine ale codurilor şi standardelor respective, titularii de autorizaţie pot solicita la CNCAN clarificări cu privire la modul de aplicare. (4) Pentru titularii de autorizaţie pentru CNE în faza de exploatare se recomandă ca în procesul de revizuire periodică a securităţii nucleare să se utilizeze cele mai noi ediţii în vigoare ale codurilor şi standardelor din anexa nr. 2. Secţiunea a 2-aVerificarea de către CNCAN a modului de utilizare a codurilor şi standardelor Articolul 6 (1) Îndeplinirea prevederilor din prezentul ghid se verifică de către CNCAN în cadrul procesului de autorizare, precum şi prin evaluări şi inspecţii periodice pe toată durata de valabilitate a unei autorizaţii.(2) Cerinţele şi criteriile din codurile şi standardele din lista stabilită conform prevederilor art. 4 pentru solicitanţii de autorizaţie şi respectiv conform prevederilor art. 5 pentru titularii de autorizaţie se utilizează de către personalul CNCAN în activităţile de evaluare şi inspecţie, ca suport pentru verificarea conformităţii cu cerinţele generale din normele de securitate nucleară şi protecţie fizică.(3) În cadrul procesului de autorizare, precum şi pe durata de valabilitate a unei autorizaţii, CNCAN poate solicita utilizarea unor coduri şi standarde suplimentare, pentru a ţine cont de experienţa acumulată, de rezultatele activităţilor de cercetare şi de cele mai noi standarde şi bune practici recunoscute la nivel internaţional.(4) Lista de coduri şi standarde din anexa nr. 2 nu este exhaustivă şi nu scuteşte solicitanţii sau titularii de autorizaţie de la obligaţia de a identifica şi utiliza toate codurile şi standardele necesare pentru asigurarea securităţii nucleare şi protecţiei fizice pentru instalaţiile de care răspund, cu precizarea ediţiei aplicabile. Articolul 7 (1) Se recomandă ca, în termen de 240 de zile de la intrarea în vigoare a prezentului ghid, titularii de autorizaţie pentru CNE aflate în faza de exploatare să transmită la CNCAN spre evaluare lista actualizată a codurilor şi standardelor utilizate, împreună cu un raport care să prezinte, pentru fiecare cod şi standard în parte, următoarele informaţii:a)ediţia utilizată sau propusă pentru utilizare; b)domeniul de aplicabilitate al standardului; c)procedurile interne ale titularului de autorizaţie în care se prevede obligativitatea conformităţii cu codul sau cu standardul respectiv; d)alte detalii relevante privind modul de utilizare a codului sau standardului respectiv, după caz. (2) Lista de coduri şi standarde utilizate de titularul de autorizaţie şi raportul prevăzut la alin. (1) se menţin ca documente controlate pe întreaga durată de viaţă a CNE. Articolul 8Anexele nr. 1 şi 2 fac parte integrantă din prezentul ghid. ANEXA Nr. 1la ghid Definiţii şi abrevieri ANSI - American National Standards Institute ASME - American Society of Mechanical Engineers ANS - American National Standard BVPC - Boiler and Pressure Vessel Code CANDU - CANada Deuterium Uranium CSA - Canadian Standards Association IEEE - Institute of Electrical and Electronics Engineers IEC - International Electrotechnical Commission ISO - International Organization for Standardization Funcţie de securitate nucleară - un scop specific care trebuie îndeplinit pentru asigurarea securităţii nucleare Funcţie de protecţie fizică - un scop specific care trebuie îndeplinit pentru asigurarea protecţiei fizice ANEXA Nr. 2la ghid LISTĂ de coduri şi standarde industriale recomandate de Comisia Naţională pentru Controlul Activităţilor Nucleare pentru centralele nuclearoelectrice Secţiunea 1 Standarde CSA 1) CSA N290.0-11 - General Requirements for Safety Systems of Nuclear Power Plants; 2) CSA N290.1-13 - Requirements for the shutdown systems of nuclear power plants; 3) CSA N290.2-11 - Requirements for emergency core cooling systems of nuclear power plants; 4) CSA N290.3-11 - Requirements for the containment system of nuclear power plants; 5) CSA N290.4-11 - Requirements for reactor control systems of nuclear power plants; 6) CSA N290.5-06 (R2011) - Requirements for Electrical Power and Instrument Air Systems of CANDU Nuclear Power Plants; 7) CSA N290.6-09 (R2014) - Requirements for monitoring and display of nuclear power plant safety functions in the event of an accident; 8) CSA N290.11-13 - Requirements for reactor heat removal capability during outage of nuclear power plants; 9) CSA N290.13-05 (R2010) - Environmental Qualification of Equipment for CANDU Nuclear Power Plants; 10) CSA N290.14-07 (R2012) - Qualification of Pre-Developed Software for Use in Safety-Related Instrumentation and Control Applications in Nuclear Power Plants; 11) CSA N290.15-10 - Requirements for the safe operating envelope of nuclear power plants; 12) CSA N285.4-14 - Periodic inspection of CANDU nuclear power plant components; 13) CSA N285.5-13 - Periodic inspection of CANDU nuclear power plant containment components; 14) CSA N285.0-12/N285.6 SERIES-12 - General requirements for pressure-retaining systems and components in CANDU nuclear power plants/Material Standards for reactor components for CANDU nuclear power plants; 15) CSA N285.8-10 - Technical requirements for in-service evaluation of zirconium alloy pressure tubes in CANDU reactors; 16) CSA N291-08 (R2013) - Requirements for Safety-Related Structures for CANDU Nuclear Power Plants; 17) CSA N287.1-14 - General requirements for concrete containment structures for nuclear power plants; 18) CSA N287.2-08 (R2013) - Material requirements for concrete containment structures for CANDU nuclear power plants; 19) CSA N287.3-14 - Design requirements for concrete containment structures for nuclear power plants; 20) CSA N287.4-09 - Construction, fabrication, and installation requirements for concrete containment structures for CANDU nuclear power plants; 21) CSA N287.5-11 - Examination and testing requirements for concrete containment structures for nuclear power plants; 22) CSA N287.6-11 - Pre-operational proof and leakage rate testing requirements for concrete containment structures for nuclear power plants; 23) CSA N287.7-08 (R2013) - In-service examination and testing requirements for concrete containment structures for CANDU nuclear power plants; 24) CSA N293-12 - Fire protection for nuclear power plants; 25) CSA N289.1-08 (R2013) - General requirements for seismic design and qualification of CANDU nuclear power plants; 26) CSA N289.2-10 - Ground motion determination for seismic qualification of nuclear power plants; 27) CSA N289.3-10 - Design procedures for seismic qualification of nuclear power plants; 28) CSA N289.4-12 - Testing procedures for seismic qualification of nuclear power plant structures, systems, and components; 29) CSA N289.5-12 - Seismic instrumentation requirements for nuclear power plants and nuclear facilities; 30) CSA N286-12 - Management system requirements for nuclear facilities; 31) CSA N286.0.1-14 - Commentary on N286-12, Management system requirements for nuclear facilities; 32) CSA N286.7-99 (R2012) - Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants; 33) CSA N286.7.1-09 - Guideline for the application of N286.7-99, Quality assurance of analytical, scientific, and design computer programs for nuclear power plants; 34) CSA N288.1-14 - Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities; 35) CAN/CSA-N288.2-M91 (R2013) - Guidelines for Calculating Radiation Doses to the Public From a Release of Airborne Radioactive Material Under Hypothetical Accident Conditions in Nuclear Reactors; 36) CSA N288.3.4-13 - Performance testing of nuclear air-cleaning systems at nuclear facilities; 37) CSA N292.0-14 - General principles for the management of radioactive waste and irradiated fuel; 38) CSA N292.2-13 - Interim dry storage of irradiated fuel; 39) CSA N292.3-14 - Management of low- and intermediate-level radioactive waste. Secţiunea a 2-aCoduri şi standarde ASME 1) ASME-BPVC-CODE CASES NUC-2013 - Code cases: Nuclear components; 2) ASME-BPVC-Section XI-2013 - Section 11 - Rules for inservice inspection of nuclear power plant components; 3) ASME-BPVC-Section III DIV 3-2013 - Section 3 - Rules for construction of nuclear facility components - Division 3 - Containments for transportation and storage of spent nuclear fuel and high level radioactive material and waste; 4) ASME-BPVC-Section III NCA-2013 - Section 3 - Rules for construction of nuclear facility components - Subsection NCA - General requirements for division 1 and division 2; 5) ASME-BPVC-Section III DIV 2-2013 - Section 3 - Rules for construction of nuclear facility components - Division 2 - Code for concrete containments; 6) ASME-BPVC-Section III APPENDICES-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Appendices; 7) ASME-BPVC-Section III NG-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection NG - Core support structures; 8) ASME-BPVC-Section III NE-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection NE - Class MC components; 9) ASME-BPVC-Section III NC-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection NC - Class 2 components; 10) ASME-BPVC-Section III NF-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection NF - Supports; 11) ASME-BPVC-Section III NB-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection NB - Class 1 components; 12) ASME-BPVC-Section III ND-2013 - Section 3 - Rules for construction of nuclear facility components - Division 1 - Subsection ND - Class 3 components; 13) ASME-BPVC-Section III NH-2013 - Section 3 - Rules for construction of nuclear power plant components - Division 1 - Subsection NH - Class 1 components in elevated temperature service; 14) ASME BPVC-Section VIII-1-2013, BPVC Section VIII - Rules for Construction of Pressure Vessels Division 1; 15) ASME BPVC-Section VIII-2 - 2013, BPVC Section VIII - Rules for Construction of Pressure Vessels Division 2 - Alternative Rules; 16) ASME BPVC-Section II, A, B, C, D - 2013, Materials; 17) ASME-BPVC-Section IX - 2013 Welding, Brazing, and Fusing Qualifications; 18) ASME B31.1- 2012, Power Piping; 19) ASME RA-S-2002, Standard for Probabilistic Risk Assessment For Nuclear Power Plant Applications; 20) ASME RA-Sa-2003, Addenda to ASME RA-S-2002 Standard For Probabilistic Risk Assessment For Nuclear Power Plant Applications; 21) ASME RA-Sb-2005, Addenda to ASME RA-S-2002 Standard For Probabilistic Risk Assessment For Nuclear Power Plant Applications; 22) ASME/ANS RA-S-2008 Standard for Level 1/Large Early Release Frequency PRA for NPP Applications; 23) ASME/ANS RA-Sa-2009, Addenda to ASME/ANS RA-S-2008 Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications; 24) ASME/ANS-RA-Sb-2013, Addenda to ASME/ANS RA-S-2008 Standard for Level 1/Large Early Release Frequency Probabilistic Risk Assessment for Nuclear Power Plant Applications; 25) ASME NQA-1 - 2012, Quality Assurance Requirements for Nuclear Facility Applications. Secţiunea a 3-aStandarde IEEE 1) IEEE Std 1023-2004 - IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities; 2) IEEE Std 7-4.3.2-2010 - IEEE Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations; 3) IEEE Std 933-2013, IEEE Guide for the Definition of Reliability Program Plans for Nuclear Generating Stations and Other Nuclear Facilities; 4) IEEE Std C37.98-2013, IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities; 5) IEEE Std 638-2013, IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations; 6) IEEE Std 379-2014, IEEE Standard for Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems; 7) IEEE Std 1205-2014, IEEE Guide for Assessing, Monitoring and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities; 8) IEEE Std 344-2013, IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations; 9) IEEE Std 317-2013, IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations; 10) IEEE Std 308-2012, IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations; 11) IEEE Std 420-2013, IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations; 12) IEEE Std 765-2012, IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS); 13) IEEE Std 1792-2011, IEEE Recommended Practice for Nuclear Power Generating Station (NPGS) Preferred Power Supply (PPS) Reliability; 14) IEEE Std 1682-2011, IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations; 15) IEEE Std 692-2013, IEEE Standard for Criteria for Security Systems for Nuclear Power Generating Stations; 16) IEEE Std 535-2013, IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations; 17) IEEE Std 577-2012, IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations; 18) IEEE Std 628-2011, IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations; 19) IEEE Std 649-2006 (R 2011), IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations; 20) IEEE Std 338-2012, IEEE Standard for Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety; 21) IEC/IEEE 62582-1:2011 Edition 1.0 2011-08, Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 1: General; 22) IEC/IEEE 62582-2:2011 Edition 1.0 2011-08, Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 2: Indenter modulus; 23) IEC/IEEE 62582-3:2011 Edition 1.0 2012-11, Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break; 24) IEC/IEEE 62582-4:2011 Edition 1.0 2011-08, Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 4: Oxidation induction techniques; 25) IEEE Std C37.105-2010, IEEE Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations; 26) IEEE Std 497-2010, IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations; 27) IEEE Std 603-2009, IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations; 28) IEEE Std 650-2006, IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations; 29) IEEE Std 833-2005, IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations From Water Hazards; 30) IEEE Std 336-2010, IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities; 31) IEEE Std 690-2004, IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations; 32) IEEE Std 323-2003, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; 33) IEEE Std 383-2003 (R 2008), IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations; 34) IEEE Std 845-1999, IEEE Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations; 35) IEEE Std 1082-1997, IEEE Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations; 36) IEEE Std 1786-2011, IEEE Guide for Human Factors Applications of Computerized Operating Procedure Systems (COPS) at Nuclear Power Generating Stations and Other Nuclear Facilities; 37) IEEE Std 741-2007, IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations; 38) IEEE Std 1290-1996, IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations; 39) IEEE Std 382-2006, IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations; 40) IEEE Std 387-1995 (R 2007), IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations; 41) IEEE Std 334-2006, IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations; 42) IEEE Std 498-1990, IEEE Standard Requirements for the Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities; 43) IEEE Std 384-2008, IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits; 44) IEEE Std 572-2006 (R 2011) Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations; 45) IEEE Std 627-2010, Qualification of Equipment Used in Nuclear Facilities; 46) IEEE Std 1012-2012, IEEE Standard for Software Verification and Validation; 47) IEEE Std C37.105-2010, Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations; 48) IEEE Std 829-2008, IEEE Standard for Software and System Test Documentation; 49) IEEE Std 982.1-1998, IEEE Standard Dictionary of Measures to Produce Reliable Software; 50) IEEE Std 1028-2008, IEEE Standard for Software Reviews and Audits; 51) IEEE Std 1044-2009, IEEE Standard Classification for Software Anomalies; 52) IEEE Std 1061-1998, IEEE Standard for a Software Quality Metrics Methodology; 53) IEEE Std 1074-2006, IEEE Standard for Developing a Software Project Life Cycle Process; 54) IEEE Std 1517-2010, IEEE Standard for Information Technology - System and Software Life Cycle Processes -Reuse Processes; 55) IEEE Std 730-2002, IEEE Standard for Software Quality Assurance Plans; 56) IEEE Std 1058-1998, IEEE Standard for Software Project Management Plans; 57) IEEE Std 1228-1994, IEEE Standard for Software Safety Plans; 58) IEEE Std 828-2005, IEEE Standard for Software Configuration Management Plans; 59) IEEE Std 829-2008, IEEE Standard for Software and System Test Documentation; 60) IEEE Std 830-1998, IEEE Recommended Practice for Software Requirements Specifications; 61) IEEE Std 1016-2009, IEEE Recommended Practice for Software Design Descriptions; 62) IEEE Std 1016.1-1993, IEEE Guide to Software Design Descriptions; 63) IEEE Std 1008-1987, IEEE Standard for Software Unit Testing; 64) IEEE Std 983-1986, IEEE Guide for Software Quality Assurance Planning; 65) IEEE Std 1059-1993, IEEE Guide for Software Verification and Validation Plans; 66) IEEE Std 982.1-2005, IEEE Standard Dictionary of Measures of the Software Aspects of Dependability; 67) IEEE Std 1002-1987, Taxonomy for Software Engineering Standards; 68) IEEE Standard 1076-2008, IEEE Standard VHDL Language Reference Manual. Secţiunea a 4-aStandarde IEC 1) IEC 60515 ed2.0 (2007-02): Nuclear power plants - Instrumentation important to safety - Radiation detectors - Characteristics and test methods; 2) IEC 60568 ed2.0 (2006-01): Nuclear power plants - Instrumentation important to safety - In-core instrumentation for neutron fluence rate (flux) measurements in power reactors; 3) IEC 60671 ed2.0 (2007-05): Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing; 4) IEC 60709 ed2.0 (2004-11): Nuclear power plants - Instrumentation and control systems important to safety - Separation; 5) IEC 60737 ed2.0 (2010-06): Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods; 6) IEC 60768 ed2.0 (2009-04): Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions; 7) IEC 60780 ed2.0 (1998-10): Nuclear power plants - Electrical equipment of the safety system - Qualification; 8) IEC 60880 ed2.0 (2006-05): Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions; 9) IEC 60951-1 ed2.0 (2009-06): Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements; 10) IEC 60951-2 ed2.0 (2009-06): Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions

- Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air; 11) IEC 60951-3 ed2.0 (2009-06): Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions

- Part 3: Equipment for continuous high range area gamma monitoring; 12) IEC 60951-4 ed2.0 (2009-06): Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions

- Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams; 13) IEC 60964 ed2.0 (2009-02): Nuclear power plants - Control rooms – Design; 14) IEC 60965 ed2.0 (2009-07): Nuclear power plants - Control rooms - Supplementary control points for reactor shutdown without access to the main control room; 15) IEC 60987 ed2.1 Consol. with am1 (2013-02): Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems; 16) IEC 60988 ed2.0 (2009-08): Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures; 17) IEC 61031 ed1.0 (1990-06): Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences; 18) IEC 61225 ed2.0 (2005-12): Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies; 19) IEC 61226 ed3.0 (2009-07): Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions; 20) IEC 61227 ed2.0 (2008-04): Nuclear power plants - Control rooms - Operator controls; 21) IEC 61250 ed1.0 (1994-01): Nuclear reactors - Instrumentation and control systems important for safety - Detection of leakage in coolant systems; 22) IEC 61468 ed1.0 (2000-03): Nuclear power plants - Incore instrumentation - Characteristics and test methods of self-powered neutron detectors; 23) IEC 61468-am1 ed1.0 (2003-06): Amendment 1 -Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors; 24) IEC 61497 ed1.0 (1998-10): Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation; 25) IEC 61500 ed2.0 (2009-10): Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions; 26) IEC 61501 ed1.0 (1998-11): Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method; 27) IEC 61502 ed1.0 (1999-11): Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures; 28) IEC 61504 ed1.0 (2000-05): Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring; 29) IEC 61513 ed2.0 (2011-08) Nuclear power plants - Instrumentation and control important to safety - General requirements for systems; 30) IEC 61559-1 ed1.0 (2009-05) Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements; 31) IEC 61559-2 ed1.0 (2002-06): Radiation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 2: Requirements for discharge, environmental, accident, or post-accident monitoring functions; 32) IEC 61771 ed1.0 (1995-12): Nuclear power plants - Main control-room - Verification and validation of design; 33) IEC 61772 ed2.0 (2009-04): Nuclear power plants - Control rooms - Application of visual display units (VDUs); 34) IEC 61839 ed1.0 (2000-07): Nuclear power plants - Design of control rooms - Functional analysis and assignment; 35) IEC 61888 ed1.0 (2002-08): Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints; 36) IEC 62003 ed1.0 (2009-03): Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing; 37) IEC/TR 62096 ed2.0 (2009-03): Nuclear power plants - Instrumentation and control important to safety - Guidance for the decision on modernization; 38) IEC 62138 ed1.0 (2004-01): Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions; 39) IEC/TR 62235 ed1.0 (2005-03): Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste; 40) IEC 62241 ed1.0 (2004-11): Nuclear power plants - Main control room - Alarm functions and presentation; 41) IEC 62385 ed1.0 (2007-06): Nuclear power plants - Instrumentation and control important to safety - Methods for assessing the performance of safety system instrument channels; 42) IEC 62340 ed1.0 (2007-12): Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF); 43) IEC 62342 ed1.0 (2007-08): Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing; 44) IEC 62397 ed1.0 (2007-05): Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors; 45) IEC 62465 ed1.0 (2010-05): Nuclear power plants - Instrumentation and control important to safety - Management of ageing of electrical cabling systems; 46) IEC 62566 ed1.0 (2012-01): Nuclear power plants - Instrumentation and control important to safety - Development of HDL-programmed integrated circuits for systems performing category A functions; 47) IEC 62645 ed1.0 (2014-08): Nuclear power plants - Instrumentation and control systems - Requirements for security programmes for computer-based systems; 48) IEC 62646 ed1.0 (2012-09): Nuclear power plants - Control rooms - Computer based procedures; 49) IEC 62651 ed1.0 (2013-04): Nuclear power plants - Instrumentation important to safety - Thermocouples: characteristics and test methods; 50) IEC 62671 ed1.0 (2013-02): Nuclear power plants - Instrumentation and control important to safety - Selection and use of industrial digital devices of limited functionality; 51) IEC 62705 ed1.0 (2014-07) Nuclear power plants - Instrumentation and control important to safety - Radiation monitoring systems (RMS): Characteristics and lifecycle. Secţiunea a 5-aStandarde ISO/IEC 1) ISO/IEC 12207: 2008 (IEEE Std 12207TM-2008), Systems and Software Engineering-Software Life Cycle Processes; 2) ISO/IEC 15026-2011, Systems and Software Engineering-Systems and Software Assurance; 3) ISO/IEC TR 15026-1:2010, Systems and Software Engineering-Systems and Software Assurance-Part 1: Concepts and Vocabulary; 4) ISO/IEC 15026-2:2011, Systems and Software Engineering-Systems and Software Assurance-Part 2: Assurance Case; 5) ISO/IEC 15026-3:2011, Systems and Software Engineering-Systems and Software Assurance-Part 3: System Integrity Levels; 6) ISO/IEC 15288:2008 (IEEE Std 15288-2008), Systems and Software Engineering-System Life Cycle Processes; 7) ISO/IEC 15939-2007, Systems and Software Engineering-Measurement Process; 8) ISO/IEC 16085-2006, Systems and Software Engineering-Life Cycle Processes-Risk Management; 9) ISO/IEC/IEEE 24765-2010, Systems and Software Engineering-Vocabulary; 10) ISO/IEC/IEEE 29148-2011, Systems and Software Engineering-Life Cycle Processes; 11) ISO/IEC/IEEE 42010-2011, Systems and software engineering - Architecture description.